|
MVE™-enabled devices (intelligent cameras, DVRs and other
edge devices) can detect multiple events in parallel (e.g. forbidden zone,
lost/abandoned object, loitering, wrong direction in traffic, illegal lane
change, etc.) in video streams of up to HD 720p image resolution at 30
frames per second.
Bi-i™ V401X is the first implementation of MVE™ ready for
immediate deployment in existing commercial camera designs. It is ideal
for manufacturers interested in offering embedded Video Analytics
capabilities, or who wish to improve their existing Video Analytics
solutions.
Camera manufacturers who implement the Bi-i™ V401X into
their camera design will benefit from the power of a robust image
processing capability hard-coded into their systems combined with the
flexibility of a fully programmable application development environment.
The system is available for stand-alone testing or for
rapid integration with other modules via a choice of standard connectors.
For application development, the system integrator can simply control the
MVE™ from a C++ environment through the system API, or utilize Eutecus’
ready-made MVE™ Evaluation Kit 3.0, which requires only configuration
through a simple GUI, no programming, to show a wide variety of typical
video analytics functions for demonstration purposes.
The design includes the Xilinx Spartan-3A DSP 3400A™ FPGA
chip, SDRAM and Flash memory for application programming and storage.
Space remains on the FPGA for additional processing requirements such as
compression and encoding. Please contact Eutecus, Inc. about ordering
the Bi-i™ V401X for evaluation and to discuss implementation and
licensing.
See technical specifications below.
|
| NEW: |
|
|
Key Bi-i™ V401X VA Module Features: |
- Video Analytics (VA) on a single FPGA chip (MVE™ SoC)
- FPGA: Xilinx Spartan-3A DSP 3400A™
- Input video resolution up to HD (720p)
- Multiple event detection at 30fps at full resolution
- Stand alone operation: after configuration no external control
is required
- Composite video (NTSC, PAL) or DVI input
- VGA output (SD/HD) with VA results overlaid on original input
video flow
- Small form factor implementation - Camera BOM is kept minimal
due to single low-cost FPGA
- Multiple connectors for flexible test/verification
- Integration into IP cameras as-is, or customized to fit the
specific camera design
- MVE™ Evaluation Kit 3.0 with full software support
- Customizable IP Core selection
- Hardware-based IP encryption
- Full firmware and software upgrade via microSD card
| |
|
FPGA - Memory Subsystem:
- Xilinx Spartan XC3SD3400A FPGA
- 16 MB Flash Memory
- 256 MB DDR2 Memory
- 2 GB microSD card for FPGA cont
Video I/O Subsystem:
- NTSC/PAL Video (Analog) Input (VGA)
- DVI Video (Digital) Input (VGA, HD 720p)
- Analog RGB Output (SD: VGA; HD: 720p)
Communication and Control:
- High-speed Serial/Parallel Digital I/O
- RS232 Control I/O
- 10/100/1000 MB Ethernet (optional)
Size, Weight & Power (SWaP):
- Size of housing: 87x54x24mm (3.4x2.2x0.9in), size of Bi-i™ V401X
single-board VA platform: 77x36x5mm (3.0x1.4x0.2in)
- Weight of module: ~140g, weight of Bi-i™ V401X single-board VA
platform: ~20g
- Power consumption: 4 - 5.5 W (for SD/HD video formats - module
level), ~3W (FPGA-memory subsystem only)
Miscellaneous:
- Real-time clock with external battery backup (optional)
- High-density flex-cable connectors for module-module interfaces
- JTAG connector for test and debug
Contact Eutecus, Inc.
for more information and ordering.
Download the Bi-i™ V401X Video Analytics Module
Brochure |
