|
MVE™ is an easily configurable, compact, high-performance processing architecture that can be used to implement complete video analytics solutions in a single FPGA. MVE™-enabled devices (intelligent cameras, DVRs and other edge devices) can detect multiple events in parallel (e.g. forbidden zone, lost/abandoned object, loitering, wrong direction in traffic, illegal lane change, etc.) in video streams of up to HD 720p image resolution at 30 frames per second.
ReCo™ V1 is the first implementation of a complete small form factor camera powered by the MVE™ System-on-Chip solution implementing the entire video analytics solution in a single low-cost FPGA chip. Combined with the exceptional image quality provided by the Pixim WDR sensor chipset, ReCo™ V1 can be readily deployed as a stand-alone video event detection solution for 24/7 indoor surveillance. Application areas of ReCo™ V1 IP camera include asset protection, office or residential monitoring, retail analysis or banking security.
ReCo™ V1 can be easily customized to fit specific needs for rapid deployment. For application development, the system integrator can simply control the MVE™ from a C++ environment through the system API, or utilize Eutecus’ ready-made MVE™ Evaluation Kit, which enables the evaluation and demonstration of a wide variety of video analytics functions by simply configuring MVE™ via a user-friendly GUI.
ReCo™ V1 can also be utilized as an IP camera reference design. The Bi-i™ V401XR VA platform design includes the Xilinx Spartan-3A DSP 3400A™ FPGA chip, SDRAM and FLASH memory for application programming and storage. Space remains on the FPGA to satisfy additional processing and control requirements.
Please contact Eutecus, Inc. about ordering the ReCo™ V1 smart IP camera for evaluation, and to discuss licensing and using the full camera development kit including the complete hardware reference design as well as software tools and libraries.
See technical specifications below.
|
| NEW: |
|
|
Key ReCo™ V1 IP Camera Features: |
- Complete MVE™-based camera reference design
- Video Analytics (VA) on a single FPGA chip (MVE™ SoC)
- Xilinx Spartan-3A DSP 3400A™ FPGA
- Pixim Orca sensor chipset for exceptional WDR performance (102-120 dB)
- Camera sensor resolution 720x480 (SD)
- Meta-data output streaming through Ethernet
- Multiple event detection at 30fps at full resolution
- Customizable IP Core selection
- Hardware-based IP encryption
- Full firmware and software upgrade via microSD card
- Stand alone operation: after configuration no external control required
- Small form factor implementation - camera BOM is kept minimal due to single low-cost FPGA
- Multiple connectors for flexible test/verification
- Lightweight plastic housing (metal housing optional)
| |
|
Video Analytics Subsystem:
- Bi-i™ V401XR VA platform
- Xilinx Spartan XC3SD3400A FPGA
- 16 MB flash memory
- 256 MB DDR2 memory
- 2 GB microSD card for FPGA content
Sensor Module:
- Orca D2520 WDR chipset
- 720x480-pixel color image at 30fps
- Lens control (auto focus and
auto iris)
Connectivity:
- Analog NTSC video output
- Ethernet (10/100/1000 Mbps) for control and meta-data
- RS232 control I/O
Miscellaneous:
- 6-12V DC power
- C/CS-mount lens holder
- Lightweight plastic housing (size: 54mm x 54mm x 104mm, excluding lens)
- Weight (excl. lens): ~153g, weight of Bi-i™ V401XR single-board VA platform: ~10g
- Power consumption: 7 W
(~3W of FPGA-memory subsystem, ~2W sensor subsystem, ~2W interfaces)
- Full firmware update from microSD card
Contact Eutecus, Inc.
for more information and ordering.
Download the ReCo™ V1 IP Camera Reference Design
Brochure |
